Q-See QSD9004V - ④ Network; ⑤ Setting; ⑥ Host Info

User Manual
35
④
④④
④ Network
⑤
⑤⑤
⑤ Setting
⑥
⑥⑥
⑥ Host Info
6.3.1.4 Log out
Log out of the system.
6.3.2 PTZ Control
Note: below-mentioned series no will be consistent with the remark no shown as Picture 6-2.
○ 2.PTZ direction control: Control PTZ moving direction
○ 3.Zoom, Focus and Iris Control: control direction, zoom, focus and iris of PTZ.
○ 4.Presetting bit Control
CUR ：
：：
： display current presetting bit or input a presetting bit you want to fix at according edit box 。
Click [Network] to enter into [Network]
menu. Remote setup methods are the same as
local DVR setup.
Please refer to Section 5.2.3. – Network
Set.
Picture 6-10
Picture 6-11
Click [setting] menu to enter into the menu interface
(shown as Picture 6-11);
Click […] button to preview net-viewer recording
saving path and screen capture saving path.
The menu also allows you to set a lower bandwidth for
Internet video transmission, set user password, turn
daylight saving time on/off, etc.
Click [Host Info.] to enter into the sub menu (shown as
Picture 6-12). Here you can check Usage rate of HDD,
available recording time, software version and MAC address.
P
icture 6
-
12
(Numbers 2, 3, 4 on Picture 6-3)