Qardio QardioArm User Manual

14
REPLACING THE BATTERIES
When the batteries are approximately 25% full
the battery symbol will appear on the Qardio
app blood pressure measurement screen.
Although the QardioArm will continue to
measure reliably, you should obtain
replacement batteries.
If the empty battery symbol appears on the
Qardio app, your QardioArm batteries are
depleted and it’s time to replace them. You
cannot take any further measurements and
must replace the batteries.
You should replace all four AAA alkaline
batteries at the same time.
Use 4 new, long-life 1.5V, size AAA batteries.
Do not use batteries beyond their expiration
date, and do not use rechargeable batteries.
To replace batteries:
1. Release the batteries compartment hatch by
pressing the button under the cuff as shown
in the drawing.
2. Replace all four AAA alkaline batteries with
new ones, ensuring that the polarities are
correctly aligned: the + (positive) and –
(negative) polarities should match the
polarities indicated on the AAA alkaline
batteries compartment.
3. Put the batteries compartment hatch back in
place, pushing until it clicks in place.
4. You will see a green light shining through the
batteries compartment hatch.
Push this button to
open hatch

Qardio QardioArm Specifications

General

Type	Automatic
Cuff size	22 - 37 cm
Product color	Red
Pulse rate range	40 - 200
Speaking function	No
Placement supported	Upper arm
Pulse rate measuring	Yes
Units of measurement	mmHg
Mean arterial pressure	-
Quantity per pack	1 pc(s)
Battery type	AAA
Battery voltage	1.5 V
Number of batteries supported	4

Weight and Dimensions

Depth	38 mm
Width	55.88 mm
Height	140 mm
Weight	310 g