Qardio QardioArm User Manual

15
RESETTING THE PAIRING
In order to reset the pairing, unwrap the cuff from around the
QardioArm to switch on the device and use a paper clip to press
the button on the pinhole on the battery compartment hatch.
You should see a green light shining through.
Use a paper clip to
press reset button
If necessary, go into the Settings of your phone or tablet, select
the QardioArm and select “Forget this device”.
Step 1 Step 2
Step 3
setting Bluetooth
Bluetooth QardioARM
Bluetooth QardioARM
Bluetooth
Forget This Device Forget This Device
Forget Device
Cancel
QardioArm
Not Connected

Qardio QardioArm Specifications

General

Type	Automatic
Cuff size	22 - 37 cm
Product color	Red
Pulse rate range	40 - 200
Speaking function	No
Placement supported	Upper arm
Pulse rate measuring	Yes
Units of measurement	mmHg
Mean arterial pressure	-
Quantity per pack	1 pc(s)
Battery type	AAA
Battery voltage	1.5 V
Number of batteries supported	4

Weight and Dimensions

Depth	38 mm
Width	55.88 mm
Height	140 mm
Weight	310 g