Qardio QardioArm User Manual

9
1. Open the Qardio app on your iOS or Android device.
2. Unwrap the cuff from around the QardioArm to switch on
the device.
3. Fit the QardioArm cuff around your upper arm. You can
review the instructions for proper cuff placement at any
point.
4. Press the green START
button on the Qardio app
Blood Pressure
measurement screen to
start measuring.
The cuff will inflate
automatically. Relax,
do not move and do not
tense your arm muscle
DETAILED INSTRUCTIONS ON TAKING A BLOOD
PRESSURE MEASUREMENT
Taking a blood pressure measurement with the QardioArm is easy
and is done in a few simple steps:
until the measurement result is displayed. Breathe normally
and do not talk.
When the correct pressure is reached, the inflation stops and
the pressure gradually decreases. If the required pressure was
not reached, the device will automatically inflate additional air
into the cuff.
5. The result, comprising the systolic and the diastolic blood
pressure and the pulse rate, is displayed on the Qardio app.
6. When the device has
finished measuring, remove
the cuff and wrap it around
the QardioArm to switch
off the device.
If the cuff is left
unwrapped, in a few
minutes QardioArm
switches off automatically
to preserve battery power.

Qardio QardioArm Specifications

General

Type	Automatic
Cuff size	22 - 37 cm
Product color	Red
Pulse rate range	40 - 200
Speaking function	No
Placement supported	Upper arm
Pulse rate measuring	Yes
Units of measurement	mmHg
Mean arterial pressure	-
Quantity per pack	1 pc(s)
Battery type	AAA
Battery voltage	1.5 V
Number of batteries supported	4

Weight and Dimensions

Depth	38 mm
Width	55.88 mm
Height	140 mm
Weight	310 g