Qardio QardioArm User Manual

20
ERROR MESSAGES AND TROUBLESHOOTING
Possible solutions:
1) Close the QardioArm cuff and reopen
it again.
2) Ensure that Bluetooth is enabled on
your phone or tablet and the QardioArm
is nearby your phone or tablet.
3) Replace the batteries of the QardioArm.
4) Reset the pairing.
Measurement could not be performed.
START button is gray, not green.
During the measurement, error signals
were auto-detected by the device, or the
pulse signals on the cuff are too weak.
QardioArm is not connected to your
smartphone or tablet.
Re-position the cuff and repeat the
measurement keeping your arm still
and without talking. Check the marks
on the cuff and the instructional videos
on the Qardio app to verify you are
positioning the QardioArm correctly.
If the problem occurs again, please
contact customer service.
REMEDYCAUSEPROBLEM

Qardio QardioArm Specifications

General

Type	Automatic
Cuff size	22 - 37 cm
Product color	Red
Pulse rate range	40 - 200
Speaking function	No
Placement supported	Upper arm
Pulse rate measuring	Yes
Units of measurement	mmHg
Mean arterial pressure	-
Quantity per pack	1 pc(s)
Battery type	AAA
Battery voltage	1.5 V
Number of batteries supported	4

Weight and Dimensions

Depth	38 mm
Width	55.88 mm
Height	140 mm
Weight	310 g