Qlima D620 User Manual

38
AIR FILTER
The dehumidifiers are equipped with a 3-layer filter package to clean the circulated room
air. The 3-layer filter package consists of a screen filter and (separately packed) 3M™ HAF
and active carbon filter. These filters must be placed according to the instructions before
operating the dehumidifiers.
1
Screen filter; to remove bigger dust particles.
2
3M™ HAF filter; to remove unhealthy particles from the air such as pollen, bacteria,
animal dander and dust.
3
Active carbon filter sheet; to remove odours.
TO CLEAN, INSPECT OR EXCHANGE THE FILTERS:
TAKING OUT THE FILTERS:
• Take out the water container (see chapter 'DRAINAGE OPTION').
• Take out the screen filter by firmly pressing down the top of the screen filter with 2
or 3 fingers. The screen filter will bend and the two securing hooks at the top side of
the screen filter will be releasable from its dedicated holes. The screen filter is now
disconnected and can be easily removed.
• Take out the now visible 3M
TM
HAF filter and the active carbon filter
The screen filter has to be cleaned regularly with a vacuum cleaner to avoid blocking of
the air flow. It does not need periodically replacement.
New filter
Recommended change of filter
The active carbon sheet can be cleaned with a vacuum cleaner when dusty but has to be
changed at the same time as the 3M™ HAF filter.
4
38

Qlima D620 Specifications

General

Power	340 W
Best uses	Bedroom
Placement	Floor
Air filter	Yes
Noise level	34 dB
Product color	White
Housing material	Plastic
Number of speeds	3
Water tank capacity	4 L
Dehumidifying capacity (max)	20 l/24h
Suitable for room volume up to	130 m³
International Protection (IP) code	IPX4
Operating temperature (T-T)	0 - 35 °C
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Package depth	307 mm
Package width	398 mm
Package height	631 mm
Package weight	15000 g

Weight and Dimensions

Depth	253 mm
Width	346 mm
Height	590 mm
Weight	14000 g