3–Getting Started
Opening the QConvergeConsole Main Page
3-2 SN0054669-00 C
To open QConvergeConsole locally on the server:
Open a Web browser, and then enter the following address in the address bar:
http://localhost:<port_number>/QConvergeConsole
Where <port_number> is the port number you specified during
QConvergeConsole installation. The default port number is 8080.
The initial window of QConvergeConsole opens, as shown in Figure 3-1.
Figure 3-1. QConvergeConsole Initial Window (Example)
To open QConvergeConsole from a remote computer:
Open a Web browser, and then enter the IP address of the QConvergeConsole
server, followed by the access port and utility name in the address bar. Use the
following format:
http://<server_ip_address>:<port_number>/QConvergeConsole/
Where <port_number> is the port number you specified during
QConvergeConsole installation. The default port number is 8080.
To Next Page
Loading...