Need help?Do you have a question about the Qlogic QConvergeConsole CLI 2400 Series and is the answer not in the manual?
Provides basic information to get started with QConvergeConsole CLI.
Describes the CLI help system and the intended audience for the guide.
Lists related documents and explains typographic conventions used in the guide.
Details on obtaining technical support, training, contact information, and accessing the knowledge base.
Specifies the minimum hardware needed for workstation server and adapters.
Lists required software and supported operating systems for QConvergeConsole CLI.
Details the QLogic adapters that are compatible with the QConvergeConsole CLI.
Describes the command-line interface for executing commands and terminating.
Explains the menu-driven interface for managing QLogic adapters and functions.
Provides instructions for launching the CLI in Windows and Linux environments.
Details the syntax structure for noninteractive NIC commands with switches.
Lists and describes each noninteractive NIC command line option alphabetically.
Shows host information, OS type, version, and SAN API version.
Provides a summary of selected adapter settings and additional adapter details.
Defines the syntax structure for noninteractive Fibre Channel commands.
Lists and describes each noninteractive Fibre Channel command alphabetically.
Details the syntax structure for noninteractive iSCSI commands.
Lists and describes each noninteractive iSCSI command alphabetically.
Defines the syntax structure for noninteractive NPAR commands.
Lists and describes each noninteractive NPAR command alphabetically.
Provides options to view information about the adapter, ports, and VPDs.
Offers options to configure adapter aliases and NIC port settings.
Presents options to update Flash memory, adapter parameters, and drivers.
Provides options to test registers, hardware, interrupts, links, ports, and LEDs.
Displays NIC, FCoE, and iSCSI port statistics and offers reset options.
Allows viewing FC adapter, port, VPD, and target/LUN information.
Enables configuration of adapter parameters, persistent names, and boot devices.
View, configure, and restore adapter parameters for Fibre Channel HBAs.
Manages persistent binding of targets to ports, including display, bind, and unbind.
Allows viewing and configuring primary and alternate boot devices.
Options to update Flash memory, adapter parameters, and drivers.
Provides tests for loopback, read-write buffer, and transceiver diagnostics.
View port statistics and link status for Fibre Channel adapters.
View adapter, port, VPD, VLAN, teaming, FCoE, iSCSI, and target/LUN info.
Configure FCoE, iSCSI, and NIC settings for converged network adapters.
Configure adapter parameters, target persistent binding, boot devices for FCoE.
Configure adapter parameters, ports, IP settings, targets, and boot devices for iSCSI.
Configure adapter aliases, port settings, VLANs, and teams for NIC.
Provides steps for setting up NIC partitions using the QCC CLI interactive mode.
Explains the functionality of NIC Partitioning (NPAR) and its benefits.
Describes how to create multiple PCIe functions and assign personalities.
Details bandwidth allocation for partitions and setting minimum/maximum percentages.
Provides reference tables for configuring NIC partitions and NPAR parameters.
To Next Page
General