Qlogic QConvergeConsole CLI 2400 Series User Manual

1–System Requirements
Software Requirements
1-2 SN0054667-00 C
Software Requirements
The software requirements for the server on which your adapter is physically
installed are as follows:
 QLogic adapter drivers for your operating system
 Administrative privileges to perform management functions
Operating System Requirements
QConvergeConsole CLI runs on the following platforms:
 Windows Server 2008
 Red Hat
®
Linux
®
Advance Server/Enterprise Server
 Novell
SUSE
®
Linux Enterprise Server (SLES)
Supported QLogic Adapters
The supported QLogic-branded adapters are as follows. For support of
OEM-branded adapters, please contact your OEM.
 2400 and 2500 Series Fibre Channel Adapters
 3200 Series Intelligent Ethernet Adapters
 8100 and 8200 Series Converged Network Adapters
NOTE:
Tape devices are shown as part of the configuration, but are not fully
supported. Only persistent binding is supported.
NOTE:
Refer to the QLogic Web site for QLogic adapter drivers and agents:
http://driverdownloads.qlogic.com
.
NOTE:
For the supported operating system versions, refer to the Readme where
QConvergeConsole CLI is posted on the QLogic Web site:
http://driverdownloads.qlogic.com
.

Qlogic QConvergeConsole CLI 2400 Series Specifications

General

Brand	Qlogic
Model	QConvergeConsole CLI 2400 Series
Category	Software
Language	English