Qlogic QConvergeConsole CLI 2400 Series User Manual

5–Fibre Channel Noninteractive Commands
-i (Display HBA General Information or VPD Information for One or All HBAs)
5-16 SN0054667-00 C
To set an alias for a specified adapter, issue the following command:
# qaucli -pr fc -ha (<hba instance> | <hba wwpn>) <alias>
To delete an alias of a specified adapter, issue the following command:
# qaucli -pr fc -ha (<hba instance> | <hba wwpn>) delete
Where:
To set an alias for the selected adapter:
# qaucli -pr fc -ha (<hba instance> | <hba wwpn>) <alias>
To delete the current alias of the selected adapter:
# qaucli -pr fc -ha (<hba instance> | <hba wwpn>) delete
To view the current alias of the selected adapter:
# qaucli -pr fc -ha (<hba instance> | <hba wwpn>) view | info
-i
(Display HBA General Information or VPD Information for One or All HBAs)
To show general adapter information or VPD information for all adapter ports in
the system, type the following command:
# qaucli -pr fc -i [ <all> ] [ <VPD> ]
Where:
To show general or VPD information for a specific adapter, issue the following
command:
# qaucli -pr fc -I (<hba instance> | <hba wwpn>) [ VPD ]
To show VPD (QLA/QLE24xx only) for all adapter ports in the system, issue the
following command:
# qaucli -pr fc -i VPD
# qaucli -pr fc -i all VPD
Where:
hba instance = Adapter number (use -g command to find)
hba wwpn = World wide port name of the adapter
alias = Symbolic adapter name. (100 characters, maximum)
all = All adapters in the system
VPD = Vital Product Data
all = VPD information for all adapters in the system

Qlogic QConvergeConsole CLI 2400 Series Specifications

General

Brand	Qlogic
Model	QConvergeConsole CLI 2400 Series
Category	Software
Language	English