Qlogic QConvergeConsole CLI 2400 Series User Manual

10–Converged Network Adapter Interactive Commands
CNA FCoE Configuration
SN0054667-00 C 10-25
HBA Parameters
2. Adapter Configuration1. CNA Configuration1. CNA FCoE Configuration1. HBA Parameters
From the Converged Network Adapter (CNA) FCoE Configuration menu, select
the HBA Parameters option to configure adapter parameters. From the port
menu, select a port to open the HBA Parameters Menu with options to display
parameters, configure parameters, and restore defaults. For example:
CNA Model QLE8242 SN: AFE1028C03899
1. Port 2 [Protocol(s): NIC iSCSI FCoE]
MAC Address: 00:0E:1E:04:95:EC
WWPN: 21-00-00-0E-1E-04-95-EF
Port iSCSI Name: iqn.2000-04.com.qlogic:isp8214.0 SFP not installed
2. Port 1 [Protocol(s): NIC iSCSI FCoE]
MAC Address: 00:0E:1E:04:95:E8
WWPN: 21-00-00-0E-1E-04-95-EB
Port iSCSI Name: iqn.2000-04.com.qlogic:isp8214.0 Online
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 2
HBA Parameters Menu
=======================================================
CNA : 0 Port: 1
SN : AFE1028C03899
ENode MacAddr : 00:0E:1E:04:95:EB
CNA Model : QLE8242
CNA Desc. : QLE8242 QLogic Pci Express to 10GbE Dual Channel CNA (FCoE)
FW Version : 4.07.31
WWPN : 21-00-00-0E-1E-04-95-EB
WWNN : 20-00-00-0E-1E-04-95-EB
Link : Online
=======================================================
1: Display HBA Parameters
2: Configure HBA Parameters
3: Restore Defaults

Qlogic QConvergeConsole CLI 2400 Series Specifications

General

Brand	Qlogic
Model	QConvergeConsole CLI 2400 Series
Category	Software
Language	English