Qlogic QConvergeConsole CLI 2400 Series User Manual

5–Fibre Channel Noninteractive Commands
-vp (Virtual Port)
5-36 SN0054667-00 C
The system shows the following information:
QConvergeConsole CLI
v1.x.x Build x
Copyright 2003-2009 QLogic Corp.
All rights reserved.
Command Line QLogic FC Host Bus Adapters.
Build Type: Release
Build Date: xx/xx/xxxx xx:xx:xx AM
-vp
(Virtual Port)
To list all virtual ports on a physical adapter port, issue the following command:
# qaucli -pr fc -vp (<hba instance> : <hba wwpn>) list all
Where:
To list a specific virtual port on a physical adapter port, issue the following
command:
# qaucli -pr fc -vp (<hba instance> : <hba wwpn>) list <vport wwpn>
To create a virtual port with an automatic WWPN, issue the following command:
# qaucli -pr fc -vp (<hba instance> : <hba wwpn>) create auto
To create a virtual port with a specific WWPN, issue the following command:
# qaucli -pr fc -vp (<hba instance> : <hba wwpn>) create <vport
hex>
When prompted, type two hexadecimal digits. The system checks these digits to
be sure they are unique and, if they are, puts them into byte 1 of the WWPN.
To delete all virtual ports on a physical adapter port, issue the following command:
# qaucli -pr fc -vp (<hba instance> : <hba wwpn>) delete all
To delete a specific virtual port on a physical adapter port, issue the following
command:
# qaucli -pr fc -vp (<hba instance> : <hba wwpn>) delete <vport
wwpn>
hba instance = Adapter number (use -g command to find)
hba wwpn = World wide port name of the adapter
vport wwpn = World wide port name of the virtual port
vport hex = World wide port name of the virtual port with the two
hex digits in byte three supplied by the user

Qlogic QConvergeConsole CLI 2400 Series Specifications

General

Brand	Qlogic
Model	QConvergeConsole CLI 2400 Series
Category	Software
Language	English