Qlogic QConvergeConsole CLI 2400 Series - Fcoe

10–Converged Network Adapter Interactive Commands
Loopback Test
10-114 SN0054667-00 C
FCoE
4. Adapter Diagnostics1. Converged Network Adapter1. CNA Model6. Loopback Test<port selection>2. FCoE
From the Loopback Test menu, select the FCoE option to open a loopback test
submenu with options to display test parameters, reset test parameters, configure
test parameters, and start the test. For example:
Loopback Test
=======================================================
CNA : 0 Port: 1
SN : AFE1028C03899
ENode MacAddr : 00:0E:1E:04:95:EB
CNA Model : QLE8242
CNA Desc. : QLE8242 QLogic Pci Express to 10GbE Dual Channel CNA (FCoE)
FW Version :
WWPN : 21-00-00-0E-1E-04-95-EB
WWNN : 20-00-00-0E-1E-04-95-EB
Link : Online
=======================================================
1: Display Test Parameters
2: Reset Test Parameters
3: Configure Test Parameters
4: Start Diagnostics Test