Qlogic QConvergeConsole CLI 2400 Series - Loopback Test

10–Converged Network Adapter Interactive Commands
Loopback Test
SN0054667-00 C 10-113
Loopback Test
4. Adapter Diagnostics1. Converged Network Adapter1. CNA Model6. Loopback Test
From the Converged Network Adapter (CNA) Diagnostics menu, select the
Loopback Test option. From the port menu, select a port to open the Loopback
Test menu with options to test NIC, FCoE, and iSCSI functions. A loopback plug
must be installed in the port. For example:
Converged Network Adapter (CNA) Diagnostics
CNA Model QLE8242 SN: AFE1028C03899
1. Port 2 [Protocol(s): NIC iSCSI FCoE]
MAC Address: 00:0E:1E:04:95:EC
WWPN: 21-00-00-0E-1E-04-95-EF
Port iSCSI Name: iqn.2000-04.com.qlogic:isp8214.0 SFP not installed
2. Port 1 [Protocol(s): NIC iSCSI FCoE]
MAC Address: 00:0E:1E:04:95:E8
WWPN: 21-00-00-0E-1E-04-95-EB
Port iSCSI Name: iqn.2000-04.com.qlogic:isp8214.0 Online
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 2
Loopback Test
1: NIC
2: FCoE
3: iSCSI
NIC
4. Adapter Diagnostics1. Converged Network Adapter1. CNA Model6. Loopback Test<port selection>1. NIC
This option is currently not supported.