7–NIC Partitioning (NPAR) Noninteractive Commands
-setminbw (Set Minimum Bandwidth)
7-6 SN0054667-00 C
-setminbw
(Set Minimum Bandwidth)
To set NPAR minimum bandwidth value, issue the following command:
> qaucli -npar -setminbw <func_inst> <min_bw_value> [-p]
where
<func_inst>
is the physical function number displayed by the
-if
command.
<min_bw_value> is the minimum bandwidth value to set.
[-p] is an optional parameter; if specified, the minimum bandwidth will
persist across system reboots.
To Next Page
Loading...