Qlogic QConvergeConsole CLI 2400 Series - Display Fcoe Port Statistics

10–Converged Network Adapter Interactive Commands
Display FCoE Port Statistics
SN0054667-00 C 10-133
Display FCoE Port Statistics
5. Adapter Statistics1. Converged Network Adapter4. Display FCoE Port Statistics
From the Converged Network Adapter (CNA) Statistics menu, select the Display
FCoE Port Statistics option. From the port menu, select a port to open the HBA
Statistics Menu with options to view adapter status logging parameters, to reset
logging parameters, to configure status logging parameters, and to view status
information. For example:
Converged Network Adapter (CNA) Diagnostics
CNA Model QLE8242 SN: AFE1028C03899
1. Port 2 [Protocol(s): NIC iSCSI FCoE]
MAC Address: 00:0E:1E:04:95:EC
WWPN: 21-00-00-0E-1E-04-95-EF
Port iSCSI Name: iqn.2000-04.com.qlogic:isp8214.0 SFP not installed
2. Port 1 [Protocol(s): NIC iSCSI FCoE]
MAC Address: 00:0E:1E:04:95:E8
WWPN: 21-00-00-0E-1E-04-95-EB
Port iSCSI Name: iqn.2000-04.com.qlogic:isp8214.0 Online
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 2
HBA Statistics Menu
=======================================================
CNA : 0 Port: 1
SN : AFE1028C03899
ENode MacAddr : 00:0E:1E:04:95:EB
CNA Model : QLE8242
CNA Desc. : QLE8242 QLogic Pci Express to 10GbE Dual Channel CNA (FCoE)
FW Version :
WWPN : 21-00-00-0E-1E-04-95-EB
WWNN : 20-00-00-0E-1E-04-95-EB
Link : Online
=======================================================
1: Display Test Parameters
2: Reset Test Parameters
3: Configure Test Parameters
4: Display HBA Statistics