10–Converged Network Adapter Interactive Commands
Adapter Diagnostics
SN0054667-00 C 10-107
Adapter Diagnostics
4. Adapter Diagnostics1. Converged Network Adapter
From the main menu, select the Adapter Diagnostics option, and then select the
adapter model (CNA Model). The Converged Network Adapter (CNA)
Diagnostics menu presents options to test registers, test hardware, test Flash
memory, test interrupts, test links, test ports, test read-write buffers, test LEDs, run
the transceiver diagnostics monitoring interface (DMI), perform iSCSI adapter and
port diagnostics, and view the iSCSI port logs. For example:
CNA Adapter Information
1: CNA Model: QLE8242 SN: AFE1028C03899
Port 2 [Protocol(s): NIC FCoE iSCSI]
Port 1 [Protocol(s): NIC FCoE iSCSI]
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 1
Converged Network Adapter (CNA) Diagnostics
1: Register Test
2: Hardware Test
3: Flash Test
4: Interrupt Test
5: Link Test
6: Loopback Test
7: Read Write Buffer Test
8: Beacon/LED Test
9: Transceiver Diagnostics Monitoring Interface (DMI)
10: iSCSI Adapter Diagnostics
11: iSCSI Port Diagnostics
12: iSCSI Port Logs
To Next Page
Loading...