8–NIC Interactive Commands
Interrupt Test (-testinterrupt)
SN0054667-00 C 8-13
Interrupt Test (-testinterrupt)
4. Adapter Diagnostics1. Converged Network Adapter3. Interrupt Test
From the Converged Network Adapter (CNA) Diagnostics menu, select the
Interrupt Test option. From the port menu, select a port for which to test the
interrupts. For example:
Converged Network Adapter (CNA) Diagnostics
CNA Model QLE3242 SN: AFE1030C04339
1. Port 2 [Protocol(s): NIC]
MAC Address: 00:0E:1E:04:D3:34
2. Port 1 [Protocol(s): NIC]
MAC Address: 00:0E:1E:04:D3:30
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 1
Interrupt Test Starts ...
Test Status: Passed (Passed=1, Failed=0, ErrorCode=0)
Interrupt Test Results:
Status=Passed
Passed=1, Failed=0, ErrorCode=0
Loopback Test
4. Adapter Diagnostics1. Converged Network Adapter4. Loopback Test
From the Converged Network Adapter (CNA) Diagnostics menu, select the
Loopback Test option. From the port menu, select a port to test the port.
To Next Page
Loading...