Qlogic QConvergeConsole CLI 2400 Series User Manual

4–NIC Noninteractive Commands
-pinfo (Port Information)
4-12 SN0054667-00 C
-pinfo
(Port Information)
To view port information, issue the -pinfo command as follows:
> qaucli -pr nic -pinfo [cna_port_inst]
For example:
> qaucli -pr nic -pinfo
=== Port Information for 1. CNA Port Index ===
Hostname : STARBLAZER
Adapter Model : QLE8142
Port Alias : None
Physical MAC Address : 00:c0:dd:12:0f:f4
Physical MAC Address Alias : paul
Configured (LLA) MAC Address: 00:c0:dd:12:0f:f4
LAA MAC Address Alias : paul
IPv4 Address : 192.168.204.201
IPv4 Subnet Mask : 255.255.255.0
IPv4 Default Gateway : 255.255.255.255
IPv4 DHCP Enabled : No
DNS Servers : fec0:0:0:ffff::1
: fec0:0:0:ffff::2
: fec0:0:0:ffff::3
IPv6 Addresses : fe80::2c0:ddff:fe12:ff4
: fec0:0:0:ffff::1
: fec0:0:0:ffff::2
IPv6 Default Router : fe80::2c0:ddff:fe12:ff4
Link Status : Up
MTU : 1514
Interface Scope ID : 91
Interface Speed : 10 Gbps
Interface Description : QLogic 10Gb PCI Ethernet Adapter -
Network Load Balancing Filter Device
=== Port Information for 2. CNA Port Index ===
. . .

Qlogic QConvergeConsole CLI 2400 Series Specifications

General

Brand	Qlogic
Model	QConvergeConsole CLI 2400 Series
Category	Software
Language	English