Qlogic QConvergeConsole CLI 2400 Series User Manual

9–Fibre Channel Interactive Commands
Display FC Port Link Status
SN0054667-00 C 9-43
Display Parameters
2. Display FC Port Link Status<port selection>1. Display Parameters
From the Link Statistics Menu, select the Display Parameters option to view link
status logging parameters. For example:
---------------------------------------
Link Status Settings
---------------------------------------
AutoPoll (AP): 10
SetRate (SR): 5
LogToFile (LF): N/A
Reset Parameters
2. Display FC Port Link Status<port selection>2. Reset Parameters
From the Link Statistics Menu, select the Reset Parameters option to reset the
link status logging parameters to their default values.
Configure Parameters (-ls)
2. Display FC Port Link Status<port selection>3. Configure Parameters
From the Link Statistics Menu, select the Configure Parameters option to open
the Link Statistics submenu with options to specify the polling method, the polling
rate, and the name of the log file. For details about these parameters, see
Table 5-8. For example:
Configure Parameters Menu
=======================================================
HBA : 0 Port: 1
SN : GFC0718P57753
HBA Model : QLE2462
HBA Desc. : QLE2462 PCI Express to 4Gb FC Dual Channel
FW Version :
WWPN : 21-00-00-1B-32-17-F9-C4
WWNN : 20-00-00-1B-32-17-F9-C4
Link : Online
=======================================================
1: Auto Poll
2: Set Rate
3: Set Log File

Qlogic QConvergeConsole CLI 2400 Series Specifications

General

Brand	Qlogic
Model	QConvergeConsole CLI 2400 Series
Category	Software
Language	English