Qlogic QConvergeConsole CLI 2400 Series User Manual

4–NIC Noninteractive Commands
-sreset (Reset Ethernet Statistics Counters)
4-14 SN0054667-00 C
-sreset
(Reset Ethernet Statistics Counters)
To reset the Ethernet statistics counters, issue the -sreset command as
follows:
> qaucli -pr nic -sreset [cna_port_inst]
For example:
> qaucli -pr nic -sreset 1
Port statistics reset for 1. CNA Port Index
-statport
(Display Ethernet Port Statistics)
To view the Ethernet port statistics, issue the -statport command as follows:
> qaucli -pr nic -statport [cna_port_inst]
For example:
> qaucli -pr nic -statport 1
Port statistics for 1. CNA Port Index
txPkts : 12989
txOctets : 2302620
txMulticastPkts : 8444
txBroadcastPkts : 4195
txUnicastPkts : 350
txControlPkts : 0
txPausePkts : 0
txPkts64Octets : 1013
txPkts65to127Octets : 8746
txPkts128to255Octets : 422
txPkts256to511Octets : 2458
txPkts512to1023Octets : 0
txPkts1024to1518Octets : 350
txPkts1519toMaxOctets : 0
txUndersizePkts : 0
txOversizePkts : 0
rxOctets : 3051428
rxPkts : 18724
rxBroadcastPkts : 5728
rxMulticastPkts : 12646
rxUnicastPkts : 350
rxUndersizePkts : 0
rxOversizePkts : 0
rxJabberPkts : 0
rxUndersizeFCSerrorPkts : 0
rxPkts64Octets : 417
rxPkts65to127Octets : 9351

Qlogic QConvergeConsole CLI 2400 Series Specifications

General

Brand	Qlogic
Model	QConvergeConsole CLI 2400 Series
Category	Software
Language	English