Qlogic QConvergeConsole CLI 2400 Series User Manual

5–Fibre Channel Noninteractive Commands
-o (Output to a File)
5-28 SN0054667-00 C
-o
(Output to a File)
To output result and status messages into a file, type -o, followed by the file
name. For example, to save LUN information to a file named systemLUNinfo:
# qaucli -pr fc -l -o systemLUNinfo
Where the file name is systemLUNinfo, all messages are located in the
directory indicated for the system platform:
-p
(Display Persistent Target Binding Info)
With this command you can:
 Show binding information for one or on all adapters.
 Bind a specific target to a selected adapter.
 Bind all targets on a specific adapter or on all adapter.
 Unbind a specific target.
 Unbind all targets on a specific adapter or on all adapters.
To show target persistent binding information for a specific adapter port, issue the
following command:
# qaucli -pr fc -p (<hba instance> | <hba wwpn>) (view | info)
NOTE:
 The -o option is valid only in noninteractive mode.
 This option can be used with all noninteractive mode options that have a
corresponding interactive mode option (see Tab l e 5-1 ). The option must
be the first or last command in the command line.
 If the file already exists, new data are appended to the current file.
Windows:
syslog.log in the current directory
Linux:
/var/log/messages
Mac OS:
/var/log/system.log
NOTE:
Under Linux, if you use the IOCTL or sysfs (inbox) driver these features are
disabled.

Qlogic QConvergeConsole CLI 2400 Series Specifications

General

Brand	Qlogic
Model	QConvergeConsole CLI 2400 Series
Category	Software
Language	English