Qlogic QConvergeConsole CLI 2400 Series User Manual

9–Fibre Channel Interactive Commands
HBA Parameters
SN0054667-00 C 9-11
Restore Defaults
1. HBA Parameters<port selection>3. Restore Defaults
From the HBA Parameters Menu, select the Restore Defaults option to reset the
adapter parameters to their default values. For example:
Warning:
Please update the HBA parameters with extreme care.
Incorrectly updating the HBA parameters may render the HBA inoperable.
If you currently have boot device information set up in the HBA
parameters, updating the HBA Parameters from a file
will preserve that information.
Do you want to proceed with the operation?
1: Yes
2: No
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 1

Qlogic QConvergeConsole CLI 2400 Series Specifications

General

Brand	Qlogic
Model	QConvergeConsole CLI 2400 Series
Category	Software
Language	English