Qlogic QConvergeConsole CLI 2400 Series - Setting Up NIC Partitions

11–NIC Partitioning (NPAR) Interactive Commands
Setting Up NIC Partitions
11-2 SN0054667-00 C
Setting Up NIC Partitions
To set up NIC partitions using the QCC CLI:
1. Start the QCC CLI interface and select option 6: NIC Partitioning
<NPAR> Information (Figure 11-1).
Figure 11-1. Selecting Option 6 to View NPAR Information Options
2. Enter option 2: NPAR Port Information (Figure 11-2).
Figure 11-2. Selecting Option 2 to View NPAR Port Information