Qlogic QConvergeConsole CLI 2400 Series User Manual

10–Converged Network Adapter Interactive Commands
Read Write Buffer Test
SN0054667-00 C 10-117
Read Write Buffer Test
4. Adapter Diagnostics1. Converged Network Adapter7. Read Write Buffer Test
From the Converged Network Adapter (CNA) Diagnostics menu, select the Read
Write Buffer Test option. From the port menu, select a port to open the Read
Write Buffer Test menu with options to test FCoE and iSCSI functions. For
example:
Converged Network Adapter (CNA) Diagnostics
CNA Model QLE8242 SN: AFE1028C03899
1. Port 2 [Protocol(s): NIC iSCSI FCoE]
MAC Address: 00:0E:1E:04:95:EC
WWPN: 21-00-00-0E-1E-04-95-EF
Port iSCSI Name: iqn.2000-04.com.qlogic:isp8214.0 SFP not installed
2. Port 1 [Protocol(s): NIC iSCSI FCoE]
MAC Address: 00:0E:1E:04:95:E8
WWPN: 21-00-00-0E-1E-04-95-EB
Port iSCSI Name: iqn.2000-04.com.qlogic:isp8214.0 Online
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 2
Read Write Buffer Test
1: FCoE
2: iSCSI
FCoE
4. Adapter Diagnostics1. Converged Network Adapter7. Read Write Buffer Test<port selection>1. FCoE
From the Read Write Buffer Test menu, select the FCoE option to open a Read
Write Buffer Test submenu with options to display test parameters, reset test
parameters, configure test parameters, and start the test. For example:
Read Write Buffer Test
1: Display Test Parameters
2: Reset Test Parameters
3: Configure Test Parameters
4: Start Diagnostics Test

Qlogic QConvergeConsole CLI 2400 Series Specifications

General

Brand	Qlogic
Model	QConvergeConsole CLI 2400 Series
Category	Software
Language	English