Qlogic QConvergeConsole CLI 2400 Series User Manual

10–Converged Network Adapter Interactive Commands
CNA VPD Information
SN0054667-00 C 10-9
iSCSI
1. Adapter Information1. Converged Network Adapter 2. CNA Port Information<port selection>3. iSCSI
CNA Port Information menu, select the iSCSI option to view iSCSI port
information. For example:
------------------------------------------------------------------
User Defined IP Address.
IPv4 Address : 192.168.1.45
Gateway : 0.0.0.0
Subnet Mask : 255.255.255.0
IPv6 Protocol is currently disabled.
iSNS : Disabled.
------------------------------------------------------------------
CNA VPD Information
1. Adapter Information1. Converged Network Adapter3. CNA VPD Information
From the Converged Network Adaptor Information menu, select the CNA VPD
Information option to view VPD information. From the port menu, select a port,
and then select the information type (NIC, FCoE, or iSCSI). For example:
Converged Network Adapter Information
CNA Model QLE8242 SN: AFE1028C03899
1. Port 2 [Protocol(s): NIC iSCSI FCoE]
MAC Address: 00:0E:1E:04:95:EC
WWPN: 21-00-00-0E-1E-04-95-EF
Port iSCSI Name: iqn.2000-04.com.qlogic:isp8214.0 SFP not installed
2. Port 1 [Protocol(s): NIC iSCSI FCoE]
MAC Address: 00:0E:1E:04:95:E8
WWPN: 21-00-00-0E-1E-04-95-EB
Port iSCSI Name: iqn.2000-04.com.qlogic:isp8214.0 Online
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 2
CNA VPD Information
1: NIC
2: FCoE
3: iSCSI

Qlogic QConvergeConsole CLI 2400 Series Specifications

General

Brand	Qlogic
Model	QConvergeConsole CLI 2400 Series
Category	Software
Language	English