Qlogic QConvergeConsole CLI 2400 Series - Configure Test Parameters

9–Fibre Channel Interactive Commands
Loopback Test (-kl)
SN0054667-00 C 9-31
Configure Test Parameters
4. Adapter Diagnostics2. Fibre Channel Adapter1. Loopback Test<port selection>3. Configure Test Parameters
From the Loopback Test menu, select the Configure Test Parameters option to
open the Loopback Test submenu with options to configure the data pattern, data
size, number of tests, test increment, and error handling. For detailed information
about these parameters, see Tab l e 5- 6 .
For example:
Loopback Test
=======================================================
HBA : 0 Port: 1
SN : GFC0718P57753
HBA Model : QLE2462
HBA Desc. : QLE2462 PCI Express to 4Gb FC Dual Channel
FW Version :
WWPN : 21-00-00-1B-32-17-F9-C4
WWNN : 20-00-00-1B-32-17-F9-C4
Link : Online
=======================================================
1: Data Patterns
2: Data Size
3: Number Of Test(s)
4: Test Increment(s)
5: Abort On Error