Qlogic QConvergeConsole CLI 2400 Series - Display Boot Device(S) (-E)

9–Fibre Channel Interactive Commands
Boot Devices Configuration
SN0054667-00 C 9-17
Display Boot Device(s) (-e)
3. Boot Devices Configuration<port selection>1. Display Boot Device(s)
From the Boot Device Settings Menu, select the Display Boot Device(s) option
to view boot devices. For example:
------------------------------------------------------------------------------
HBA Instance 0: QLE2462 Port 1 WWPN 21-00-00-1B-32-17-F9-C4 PortID 00-00-00
------------------------------------------------------------------------------
Boot Device Settings:
---------------------------------------
Selectable Boot: Enabled
---------------------------------------
(Primary ) Boot Port Name LUN
---------------------------- ------
00-00-00-00-00-00-00-00 0
---------------------------- ------
(Alternate 1) Boot Port Name LUN
---------------------------- ------
00-00-00-00-00-00-00-00 0
---------------------------- ------
(Alternate 2) Boot Port Name LUN
---------------------------- ------
00-00-00-00-00-00-00-00 0
---------------------------- ------
(Alternate 3) Boot Port Name LUN
---------------------------- ------
00-00-00-00-00-00-00-00 0