Qlogic QConvergeConsole CLI 2400 Series User Manual

5–Fibre Channel Noninteractive Commands
-pa (Define Port Alias)
5-30 SN0054667-00 C
To unbind a specific target, issue the following command:
# qaucli -pr fc -p (<hba instance> | <hba wwpn>) (remove <target
wwnn> | unbind <target wwnn>)
Where:
To unbind all targets on a specific adapter port or on all adapter ports, issue the
following command:
# qaucli -pr fc -p (<hba instance> | <hba wwpn> | all) (remove all
| unbind all)
Where:
-pa
(Define Port Alias)
With this command you can:
 Define the port alias for a specific adapter port (1)
 Delete the port alias from a specific adapter port (2)
 View the port alias for a specific adapter port (3)
To define a port alias for the specified adapter, issue the following command:
# qaucli -pr fc -pa (<hba instance> | <hba wwpn>) <alias>
Where:
To delete a port alias for the specified adapter port, issue the following command:
# qaucli -pr fc -pa (<hba instance> | <hba wwpn>) delete
To view a port alias for the specified adapter port, issue the following command:
# qaucli -pr fc -pa (<hba instance> | <hba wwpn>) view | info
hba instance = Adapter number (use -g command to find)
hba wwpn = World wide port name of the adapter
target wwnn = World wide node name of the target
hba instance = Adapter number (use -g command to find)
hba wwpn = World wide port name of the adapter
hba instance = Adapter number (use -g command to find)
hba wwpn = World wide port name of the adapter
alias = Symbolic name you assign to the adapter port

Qlogic QConvergeConsole CLI 2400 Series Specifications

General

Brand	Qlogic
Model	QConvergeConsole CLI 2400 Series
Category	Software
Language	English