Qlogic QConvergeConsole CLI 2400 Series - Beacon;Led Test

10–Converged Network Adapter Interactive Commands
Beacon/LED Test
10-120 SN0054667-00 C
Beacon/LED Test
4. Adapter Diagnostics1. Converged Network Adapter8. Beacon/LED Test
From the Converged Network Adapter (CNA) Diagnostics menu, select the
Beacon/LED Test option. From the port menu, select a port to run the test. For
example:
Converged Network Adapter (CNA) Diagnostics
CNA Model QLE8242 SN: AFE1028C03899
1. Port 2 [Protocol(s): NIC iSCSI FCoE]
MAC Address: 00:0E:1E:04:95:EC
WWPN: 21-00-00-0E-1E-04-95-EF
Port iSCSI Name: iqn.2000-04.com.qlogic:isp8214.0 SFP not installed
2. Port 1 [Protocol(s): NIC iSCSI FCoE]
MAC Address: 00:0E:1E:04:95:E8
WWPN: 21-00-00-0E-1E-04-95-EB
Port iSCSI Name: iqn.2000-04.com.qlogic:isp8214.0 Online
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 2
LED Test Starts ...
Test Status: Passed (Passed=1, Failed=0, ErrorCode=0)
LED Test Results:
Status=Passed
Passed=1, Failed=0, ErrorCode=0