4–NIC Noninteractive Commands
-icna (CNA Information)
4-8 SN0054667-00 C
For example:
> qaucli -pr nic -i 1
1. CNA: 1 CNA Port: 1 CNA Model: QLE8142 PortID: 0
Mac Phys. Address: 00:c0:dd:12:0f:f4 Loc. Mac: 00:c0:dd:12:0f:f4
CNA Serial Number: AFC0916A07152 MPI FW Version: 1.35.00 Adapter Alias:
None
Port Alias: CNA X54
IPv4 Address: 192.168.204.201
IPv6 Addresses: fe80::2c0:ddff:fe12:ff4
-icna
(CNA Information)
To view adapter information, issue the -icna command as follows:
> qaucli -pr nic -icna [cna_port_inst]
For example:
> qaucli -pr nic -icna 2
=== CNA Information for 2. CNA Port Index ===
Hostname : WIN-4ZKSPMU5N5L
Adapter Model : QLE8142
Chip Model : 8001
Chip Version : A1
Adapter Alias : None
Serial Number : RFC0916K61116
MAC Address : 00:c0:dd:10:27:60
MAC Address : 00:c0:dd:10:27:62
Driver Information : Ndis 6.x 10GbE driver (X86)
Driver Name : qlge.sys
Driver Version : 1.0.1.0
MPI Firmware Version : 1.35.06
PXE Boot Version : NA
VLAN & Team Driver Name :
VLAN & Team Driver Version :
FCoE Driver Version : 9.1.8.17
FCoE Firmware Version : 5.01.03
FCoE SDMAPI Version : 01.28.00.75
To Next Page
Loading...
Need help?
General
