8–NIC Interactive Commands
Hardware Test (-testhw)
8-12 SN0054667-00 C
Hardware Test (-testhw)
4. Adapter Diagnostics1. Converged Network Adapter2. Hardware Test
From the Converged Network Adapter (CNA) Diagnostics menu, select the
Hardware Test option. From the port menu, select a port for which to test the
hardware. For example:
Converged Network Adapter (CNA) Diagnostics
CNA Model QLE3242 SN: AFE1030C04339
1. Port 2 [Protocol(s): NIC]
MAC Address: 00:0E:1E:04:D3:34
2. Port 1 [Protocol(s): NIC]
MAC Address: 00:0E:1E:04:D3:30
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 1
Hardware Test Starts ...
Test Status: Passed (Passed=1, Failed=0, ErrorCode=0)
Hardware Test Results:
Status=Passed
Passed=1, Failed=0, ErrorCode=0
To Next Page
Loading...
Need help?
General
