Qlogic QConvergeConsole CLI 2400 Series - Link Test (-Testlink)

8–NIC Interactive Commands
Link Test (-testlink)
8-14 SN0054667-00 C
Link Test (-testlink)
4. Adapter Diagnostics1. Converged Network Adapter5. Link Test
From the Converged Network Adapter (CNA) Diagnostics menu, select the
Link Test option. From the port menu, select a port to test the links. For example:
Converged Network Adapter (CNA) Diagnostics
CNA Model QLE3242 SN: AFE1030C04339
1. Port 2 [Protocol(s): NIC]
MAC Address: 00:0E:1E:04:D3:34
2. Port 1 [Protocol(s): NIC]
MAC Address: 00:0E:1E:04:D3:30
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 1
Link Test Starts ...
Test Status: Failed (Passed=0, Failed=1, ErrorCode=15)
Link Test Results:
Status=Failed
Passed=0, Failed=1, ErrorCode=15