Qlogic QConvergeConsole CLI 2400 Series - Display Configuration

9–Fibre Channel Interactive Commands
Target Persistent Bindings (-p)
SN0054667-00 C 9-13
Display Configuration
2. Adapter Configuration2. Fibre Channel Adapter2. Target Persistent Bindings<port selection>
1. Display Configuration
From the Target Persistent Bindings Menu, select the Display Configuration
option to view the target binding configuration. For example:
--------------------------------------------------------------------------
HBA 0: QLA2462 Port 1 WWPN xx-xx-xx-xx-xx-xx-xx-xx Port ID 11-06-EF
--------------------------------------------------------------------------
Bind Type Device Node Name Device Port Name Port ID ID
---- ---- ---------------- ---------------- ------- --
No Disk xx-xx-xx-xx-xx-xx-xx-xx xx-xx-xx-xx-xx-xx-xx-xx 10-02-E1
Yes Disk xx-xx-xx-xx-xx-xx-xx-xx xx-xx-xx-xx-xx-xx-xx-xx 10-02-E2 0
Yes Disk xx-xx-xx-xx-xx-xx-xx-xx xx-xx-xx-xx-xx-xx-xx-xx 10-02-E4 1
Yes Disk xx-xx-xx-xx-xx-xx-xx-xx xx-xx-xx-xx-xx-xx-xx-xx 10-02-E8 2