5–Fibre Channel Noninteractive Commands
-e (Boot Device View | Select | Disable)
SN0054667-00 C 5-9
To show transceiver monitoring detailed information, issue the following
command:
# qaucli -pr fc -dm (<hba instance> | <hba wwpn> | all) details |
det
Where:
-e
(Boot Device View | Select | Disable)
Use the -e command to:
Show the current boot-device selection for all adapters.
Show the current boot-device selection for a specific adapter.
Set a target device as the boot device for an adapter.
Selectable boot—The OS boots from the first target the BIOS finds.
Delete the boot device from an adapter.
In these commands:
To view the current boot device selection on all adapters:
# qaucli -pr fc -e all (view | info)
To view the current boot device selection for a specific adapter:
# qaucli -pr fc -e (<hba instance> | <hba wwpn>) (view | info)
In Windows and Linux, each adapter’s currently selected boot device is shown in
the following format:
<hba instance> <hba wwpn> <target wwnn> <target wwpn> <lun id>
hba instance = Adapter number (use -g command to find)
hba wwpn = World wide port name of the adapter
all = All adapters in the system
hba instance = Adapter number (use -g command to find)
hba wwpn = World wide port name of the adapter
target wwnn = World wide node name of the target
target wwpn = World wide port name of the target
target id = ID to which the target is bound
lun id = ID of the LUN
To Next Page
Loading...