Qlogic QConvergeConsole CLI 2400 Series User Manual

4–NIC Noninteractive Commands
-g (Display General System Information)
SN0054667-00 C 4-7
-p1 option:
To enable PXE LAN for the interface specified by the previous -i command,
issue the following command:
> qaucli -pr nic -flashsupport -p1 --pxe-on
-g
(Display General System Information)
To view general system information for the host, issue the -g command as
follows:
> qaucli -pr nic -g [cna_port_inst]
For example:
> qaucli -pr nic -g
Using config file: G:\Program Files\QLogic
Corporation\QConvergeConsoleCLI\qaucli.cfg
Installation directory: G:\Program Files\QLogic
Corporation\QConvergeConsoleCLI
Working dir: G:\Documents and Settings\user1
Using config file: G:\Program Files\QLogic
Corporation\QConvergeConsoleCLI\netscli.cfg
Host Name : APPCRUSHER
Host Version: Service Pack 2 (Build 3790)
Host Type : Microsoft Windows Server 2003 R2 x64
User Type : Privileged; CNA setup allowed
-h
(Help)
To view the help file, issue the -h command as follows:
> qaucli -pr nic -h
The QConvergeConsole CLI help file contains a condensed version of the
contents of this chapter.
-i
(List All QLogic CNA Ports Detected)
To view a list of all QLogic adapter ports detected, issue the -i command as
follows:
> qaucli -pr nic -i [cna_port_inst]

Qlogic QConvergeConsole CLI 2400 Series Specifications

General

Brand	Qlogic
Model	QConvergeConsole CLI 2400 Series
Category	Software
Language	English