Qlogic QConvergeConsole CLI 2400 Series User Manual

10–Converged Network Adapter Interactive Commands
CNA NIC Configuration
SN0054667-00 C 10-89
Change MAC Alias Name
3. CNA NIC Configuration2. NIC Port Setting Configuration<port selection>4. Change MAC Alias Name
Select the Change MAC Alias Name option to change the port MAC alias. For
example:
Physical MAC Address : 00:0e:1e:04:95:ec
Enter Port_Physical_MAC_Alias [None]: alias_mac
Successfully saved MAC Alias
Active/LAA MAC Address : 00:0e:1e:04:95:ec
Enter Port_LAA_MAC_Alias [None]: alias_laa
Successfully saved MAC Alias
Save Port Configuration
3. CNA NIC Configuration2. NIC Port Setting Configuration<port selection>5. Save Port Configuration
Select the Save Port Configuration option to save the port configuration. For
example:
Only save parameters that were modified? (yes, no) [yes]: y
About to save configured values ... Please wait ...
VLAN Configuration
2. Adapter Configuration1. CNA Configuration3. CNA NIC Configuration3. VLAN Configuration
From the Converged Network Adapter (CNA) NIC Configuration menu, select the
VLAN Configuration option to open the Configure VLAN Menu with options to
view the list of VLANs, view VLAN information, add a VLAN to a port or team,
configure VLAN parameters, remove a VLAN from a port or team, and refresh
adapter data. For example:
Configure VLANs Menu
1: Display VLAN List
2: Display VLAN Information
3: Add VLAN to Port or Team
4: Configure VLAN Parameters
5: Remove VLAN from Port or Team
6: Refresh

Qlogic QConvergeConsole CLI 2400 Series Specifications

General

Brand	Qlogic
Model	QConvergeConsole CLI 2400 Series
Category	Software
Language	English