Qlogic QConvergeConsole CLI 2400 Series - (Restore VLAN & Teaming Configuration)

4–NIC Noninteractive Commands
-vtrestore (Restore VLAN & Teaming Configuration)
SN0054667-00 C 4-25
pDNSServers[ 1] : fec0:0:0:ffff::2
pDNSServers[ 2] : fec0:0:0:ffff::3
............................
VLAN ID : 777
............................
IPv4Address : 169.254.202.39
IPv4SubnetMask : 0.0.0.0
IPv4GatewayAddr : 0.0.0.0
DHCPServerCount : 0
IPv6GatewayAddr :
IPv6AddressCount : 1
pDHCPServers[ 0] : fe80::d079:f594:8e03:ca27
DNSServerCount : 3
pDNSServers[ 0] : fec0:0:0:ffff::1
pDNSServers[ 1] : fec0:0:0:ffff::2
pDNSServers[ 2] : fec0:0:0:ffff::3
............................
VLAN ID : 555
............................
IPv4Address :
IPv4SubnetMask :
IPv4GatewayAddr :
DHCPServerCount : 0
IPv6GatewayAddr :
IPv6AddressCount : 0
DNSServerCount : 0
-vtrestore
(Restore VLAN & Teaming Configuration)
To reinstate previously saved VLAN and team settings from a file, issue the
-vtrestore command as follows:
> qaucli -pr nic -vtrestore [file_name]
The default file configuration file name for VLAN and teaming is
vtstate-user.cfg, which is saved in the QConvergeConsole CLI installation
directory. You may have saved your configuration with a different file name or
location.