Qlogic QConvergeConsole CLI 2400 Series User Manual

10–Converged Network Adapter Interactive Commands
Read Write Buffer Test
10-118 SN0054667-00 C
Display Test Parameters
7. Read Write Buffer Test<port selection>1. FCoE1. Display Test Parameters
From the Read Write Buffer Test menu, select the Display Test Parameters
option to view the read write buffer test parameters. For example:
------------------------------------------------------------------------------
HBA Instance 0: QLE8242 Port 1 WWPN 21-00-00-0E-1E-04-95-EB PortID 11-00-20
------------------------------------------------------------------------------
--------------------
Diagnostics Settings
--------------------
Data Pattern : Random
Data Size (Bytes) : 8
Number of tests (1-10000): 10000
Test Increment(1-10000) : 1
Abort On Error : Ignore
Test Continuous : OFF
------------------------------------------------------------------------
Reset Test Parameters
7. Read Write Buffer Test<port selection>1. FCoE2. Reset Test Parameters
From the Read Write Buffer Test menu, select the Reset Test Parameters option
to reset the read write buffer test parameters to their default values. Table 10-2
lists the default read write buffer test values.
Table 10-2. Default Read Write Buffer Test Parameter Values
Parameter Default Value
Data Pattern Random
Data Size (Bytes) 8
Number of tests 10,000
Test Increment 1
Abort On Error Ignore
Test Continuous OFF

Qlogic QConvergeConsole CLI 2400 Series Specifications

General

Brand	Qlogic
Model	QConvergeConsole CLI 2400 Series
Category	Software
Language	English