10–Converged Network Adapter Interactive Commands
CNA FCoE Configuration
10-26 SN0054667-00 C
Display HBA Parameters
From the HBA Parameters menu, select the Display HBA Parameters option to
view adapter parameters. For example:
------------------------------------------------------------------------------
HBA Instance 0: QLE8242 Port 1 WWPN 21-00-00-0E-1E-04-95-EB PortID 11-00-20
------------------------------------------------------------------------------
Connection Options : 1 - Point-to-Point Only
Data Rate : 10 Gbps
Frame Size : 2048
Hard Loop ID : 0
Loop Reset Delay (seconds) : 5
Enable Host HBA BIOS : Enabled
Enable Hard Loop ID : Disabled
Enable FC Tape Support : Enabled
Execution Throttle : 65535
Login Retry Count : 8
Port Down Retry Count : 30
Enable LIP Full Login : Enabled
Link Down Timeout (seconds) : 30
Enable Target Reset : Enabled
LUNs Per Target : 128
Out Of Order Frame Assembly : Disabled
To Next Page
Loading...
Need help?
General
