MULTIPLEX
Atmospheric Oil Mist Detection System
AM8/JANUARY 2015
EMAIL qmi@oilmist.com WEBSITE www.oilmist.com 4 East Barnet Road, London, England, EN4 8RW TEL +44 (0)20 7328 3121
Spares Part6-2
CODES AND DESCRIPTION FOR REPLACEMENT PARTS
AND SPARES
Code QMI Product Description
Q01H QMI MULTIPLEX Monitor With Harting Connectors
Q01H1 Monitor Connector Harting 32-Way Mating Connector 1
(To MULTIPLEX Junction Box)
Q01H2 Monitor Connector Harting 4-Way Plug Mating Connector 2
(To Shutdown Output)
Q01H3 Monitor Connector Harting 10-Way Plug Mating Connector 3
(To Alarm Output)
Q01H4 Monitor Connector Harting 4-Way Socket Mating Connector 4
(To Power Input)
Q01H5 Monitor Connector Harting 16-Way Plug Mating Connector 5
(To Datalogger Output)
Q0103 Monitor Security Keys Monitor Security Switch to change settings
(Pack of 2)
Q0104A PCB Type MP12 v 3.2
Processing Board
For Monitor contains Flash Memory Chip
Q0106 Switch Mode Power Supply No case, for Power Supply Unit for Monitor
Q0109 Magnetic Pen To activate displays on Monitor
Q0111 TR1 Transistor Power Supply Board of Q01H Monitor
Q0112 400mA Anti-surge Fuse For FS2 on Power Supply Board
For FS3 Data Logger Protection
FS2 only on Monitors with 3 Fuses
(Pack of 5)
Q0113 M 4 Hexagonal Allen Key To open Q01T Monitor lid
Q0114 1.25 Amp fuse For FS1 on Power Supply Board
(Pack of 5)
Q0115 3.15 Amp fuse For FS4 on side of Monitor for Monitors with
4 Fuses
For FS3 only on Monitors with 3 Fuses
For Power Supply Fuse in Q07 Junction Box
(Pack of 5)
Q10 Atmospheric Sensor With Integral Fan, Mating Connector and
Articulated Joint
Q1002 Manual Installation and Operation Manual
Q1004 Replacement Fan For Q10 Sensor, includes fixing screws
Q1005 Maintenance Kit See Part 5-6
Q1006 Replacement Socket For Sensor, 6 Pin Bulgin Socket
Q1007 M 2.5 Hexagonal Allen Key For Sensor lid, inspection cover and fan
Q1008 M 3 Hexagonal Allen Key For Articulated Joint on Sensor
Q1010 Cleaning Fluid Recommended Cleaning Fluid
“Clean All“ 200ml for cleaning Sensor lenses
To Next Page
Loading...
