EasyManua.ls Logo

QNAP ES1686dc - User Manual

QNAP ES1686dc
62 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ES1686dc
User Guide
Document Version: 8
02/06/2020

Table of Contents

Questions and Answers

  • A
    adrienne15Aug 10, 2025
    What to do if hot-swapping of drives fails on QNAP ES1686dc Network Storage Server?
    • T
      Tonya ParksAug 10, 2025
      If hot-swapping drives fails, log in to QES as administrator. Then go to Main Menu > Storage Manager > Storage > Disks, and locate the failed drive. Prepare a new hard drive with the same or larger capacity than the failed one. Remove the failed drive from the QNAP Network Storage Server, wait for 20 seconds (or until the NAS beeps twice), remove the drive from the tray, insert the new drive into the tray, and install it. The NAS will beep twice. Finally, go to Main Menu > Storage Manager > Storage Space.
  • J
    Jill MorrisAug 25, 2025
    Why Qfinder Pro is unable to locate the QNAP ES1686dc during QES installation?
    • J
      Jacob McdonaldAug 25, 2025
      Qfinder Pro may fail to locate the QNAP Network Storage Server during QES installation if the drives or data are faulty. To resolve this, power off the NAS, remove all drives, power it back on, and use Qfinder Pro to locate the NAS. Once found, reinsert the drives and continue with the QES installation.

QNAP ES1686dc Specifications

General IconGeneral
ModelES1686dc
AES-NIYes
Flash Memory5GB (Dual boot OS protection)
Hot-swappableYes
SSD Cache Acceleration SupportYes
10 Gigabit Ethernet Port2 x 10GbE SFP+
USB 3.2 Gen 1 port2
CPU Architecture64-bit
Drive Compatibility3.5" SATA HDD, 2.5" SATA HDD/SSD
Form FactorRackmount
LED IndicatorsPower, Status, LAN, USB, HDD
ButtonsPower, Reset
Operating temperature0°C to 40°C
Relative Humidity5% to 95% non-condensing
Drive Bays16 x 3.5-inch + 4 x 2.5-inch

Related product manuals