EasyManua.ls Logo

QNAP GM-1002 - User Manual

QNAP GM-1002
53 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
GM-1000
GM-1001
GM-1002
User Guide
Document Version: 1
01/07/2020

Table of Contents

Other manuals for QNAP GM-1002

Preview: Quick Installation Guide
Quick Installation Guide16 pages

Questions and Answers

  • S
    suzannepearsonAug 8, 2025
    What to do if QNAP Network Storage Server has a failed drive in RAID 1, RAID 5, or RAID 6?
    • T
      troydavisAug 9, 2025
      If a drive fails in RAID 1, RAID 5, or RAID 6, access QuTS hero and navigate to Main Menu > Storage & Snapshots > Storage > Disks/VJBOD to find the failed drive. Replace the failed drive with a new hard drive of equal or greater capacity. After physically removing the failed drive from the NAS and waiting for two beeps (approximately 20 seconds), put the new drive into the drive tray and install it. Then, go to Main Menu > Storage & Snapshots > Storage Space, find the volume containing the new drive, and confirm that the status is 'Rebuilding'.
  • V
    Vickie JacksonAug 25, 2025
    Why Qfinder Pro or myQNAPcloud cannot locate QNAP Network Storage Server during QuTS hero installation?
    • T
      Timothy LeonardAug 25, 2025
      If Qfinder Pro or myQNAPcloud can't find the NAS during QuTS hero installation, the drives or data may be faulty. To resolve this, power off the NAS, remove all drives, power it back on, and use Qfinder Pro or myQNAPcloud to locate the NAS. Once found, reinsert the drives and proceed with the QuTS hero installation.

QNAP GM-1002 Specifications

General IconGeneral
ModelGM-1002
CategoryStorage
Form Factor2.5-inch
InterfaceSATA 6Gb/s
Drive TypeSSD
Supported SSDs2.5-inch SATA SSDs
Compatible DevicesQNAP NAS
CoolingFan

Related product manuals