QNAP TS-251+ - Page 76

76
7. Password
8. Back
1. TCP/IP
The following options are available:
 LAN1 IP Address
 LAN1 Subnet Mask
 LAN1 Gateway
 LAN 1 PRI. DNS
 LAN 1 SEC. DNS
 Enter Network Settings
 Network Settings – DHCP
 Network Settings – Static IP*
 Network Settings – BACK
 Back to Main Menu
* In Network Settings – Static IP, users can configure the IP address, subnet mask,
gateway, and DNS of LAN 1 and LAN 2.
2. Physical disk
The following options are available:
 Disk Info
 Back to Main Menu
The disk info shows the temperature and the capacity of the hard drive.
D
i
s
k
:
1
T
e
m
p
:
5
0
°
C
S
i
z
e
:
2
3
2
G
B
3. Volume
This section shows the disk configuration of the NAS. The first line shows the RAID
configuration and storage capacity; the second line shows the member drive number
of the configuration.
R
A
I
D
5
7
5
0
G
B
D
r
i
v
e
1
2
3
4
If there is more than one volume, press the “Select” button to view the information.
The following table shows the description of the LCD messages for RAID 5
configuration.
LCD Display
Drive configuration