EasyManuals Logo

QNAP TS-451 User Manual

QNAP TS-451
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
29
LED
Color
LED Status
Description
LAN
Orange
Orange
The disk data is being accessed from the
network and a read/write error occurs during
the process.
Flashes
orange
The NAS is being accessed from the network.
10GbE
2
Green
Green
The 10GbE network expansion card is
installed.
Off
No 10GbE network expansion card is installed.
HDD
3
Red/
Green
Flashes red
The disk data is being accessed and a
read/write error occurs during the process.
Red
A hard disk drive read/write error occurs.
Flashes green
The disk data is being accessed.
Green
The hard disk drive can be accessed.
USB
3
Blue
Flashes blue
every 0.5 sec
1. A USB device (connected to the front USB
port) is being detected.
2. A USB device (connected to the front USB
port) is being removed from the NAS.
3. The USB device (connected to the front
USB port of the NAS) is being accessed.
4. The data is being copied to or from the
external USB or eSATA device.
Blue
A front USB device is detected (after the
device is mounted).
Off
1. No USB device is detected.
2. The NAS has finished copying the data to
or from the USB device connected to the
front USB port.
eSATA
3
Orange
Flashes
The eSATA device is being accessed.
Off
No eSATA device can be detected.
2
The 10 GbE network expansion function is only supported by the TVS-463, TVS-663,
TVS-863/863+, TS-879 Pro, TS-1079 Pro, TS-879U-RP, TS-1279U-RP, TS-EC879U-RP,
TS-EC1279U-RP, TS-1679U-RP, TS-EC1679U-RP, TS-870U-RP, and TS-1270U-RP.
3
This feature is only available on certain NAS models. Please refer to the product specification table
for details at www.qnap.com.

Other manuals for QNAP TS-451

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the QNAP TS-451 and is the answer not in the manual?

QNAP TS-451 Specifications

General IconGeneral
RAID levels1, 5, 6, 10, JBOD
Storage drive size2.5/3.5 \
Storage drive capacity3000 GB
Supported file systemsext3, ext4, FAT32, HFS+, NTFS
Storage drive interfaceSerial ATA III
Storage drives installedYes
Installed storage drive typeHDD
Supported storage drive typesHDD & SSD
Total installed storage capacity12 TB
Maximum supported storage capacity- TB
Number of storage drives installed4
Processor cores2
Processor model-
Processor familyIntel® Celeron®
Processor frequency2.41 GHz
Flash memory512 MB
Internal memory1 GB
Internal memory typeDDR3L
Maximum RAM supported8 GB
Wi-FiNo
Ethernet LAN data rates1000 Mbit/s
Supported network protocolsCIFS/SMB, AFP(v3.3), NFS(v3), FTP, FTPS, SFTP, TFTP, HTTP(S), Telnet, SSH, iSCSI, SNMP, SMTP, SMSC
Fiber ports quantity0
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Chassis typeTower
Cooling typeActive
Fan diameter120 mm
Product colorWhite
LED indicatorsHDD, LAN, Status, USB
Number of fans1 fan(s)
Cable lock slot typeKensington
TypeNAS
Device classHome & Home Office
Backup featuresCloud, iSCSI LUN
Number of users4096 user(s)
Security algorithms256-bit AES, FIPS 140-2, HTTPS, SSH
Operating system version4.1
Operating system installedQNAP Turbo System
AC input voltage100-240 V
Power supply locationExternal
Power supply unit (PSU) capacity90 W
Cables includedAC, LAN (RJ-45)
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 95 %
Weight and Dimensions IconWeight and Dimensions
Depth235 mm
Width180 mm
Height177 mm
Weight3000 g
Package weight4300 g

Related product manuals