EasyManuals Logo

QNAP TS-651 User Manual

QNAP TS-651
135 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #91 background imageLoading...
Page #91 background image
91
3. Load tray back into drive bay.
i. Insert the drive tray into the NAS. Verify that the tray is correctly oriented (top of
HDD facing right) and fully pushed in.
ii. Close the latch, and lock the switch.
7.1.5. TS-112P, TS-212P and TS-251C
1. Loosen the screws on the rear (top and bottom) of the NAS. Remove the case cover of
the NAS by sliding it apart (see the underside of the NAS for visual indicators of the NAS
case being locked/unlocked.)

Table of Contents

Other manuals for QNAP TS-651

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the QNAP TS-651 and is the answer not in the manual?

QNAP TS-651 Specifications

General IconGeneral
RAID levels0, 1, 5, 6, 10, JBOD
RAID supportYes
Storage drive size2.5/3.5 \
Storage drive capacity- GB
Supported file systemsext4, FAT32, HFS+, NTFS
Storage drive interfaceSerial ATA III
Storage drives installedNo
Installed storage drive type-
Supported storage drive typesHDD & SSD
Total installed storage capacity0 TB
Maximum supported storage capacity- TB
Number of storage drives installed0
Number of storage drives supported6
Processor cores2
Processor familyIntel® Celeron®
Processor frequency2.41 GHz
Flash memory512 MB
Internal memory1 GB
Internal memory typeDDR3L
Maximum RAM supported8 GB
Ethernet LAN data rates10, 100, 1000 Mbit/s
Supported network protocolsCIFS/SMB, AFP (v3.3), NFS(v3), FTP, FTPS, SFTP, TFTP, HTTP(S), Telnet, SSH, iSCSI, SNMP, SMTP, SMSC
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity3
Chassis typeTower
Cooling typeActive
Fan diameter90 mm
Product colorBlack
Number of fans2 fan(s)
Cable lock slot typeKensington
TypeNAS
Device classHome & Home Office
Security algorithms256-bit AES, FIPS 140-2, HTTPS, SSH, SSL/TLS
Operating system version4.1
Operating system installedQNAP Turbo System
Fan voltage12 V
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (sleep)0.41 W
Power consumption (typical)39.42 W
Power supply unit (PSU) capacity250 W
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 95 %
Weight and Dimensions IconWeight and Dimensions
Depth235 mm
Width257 mm
Height175 mm
Weight6180 g
Package weight6900 g

Related product manuals