QNAP TS-h1290FX-7232P-64G - User Manual

QNAP TS-h1290FX-7232P-64G

61 pages

To Next Page

To Next Page

Loading...

TS-h1290FX

User Guide

Document Version: 1

20/01/2022

Table of Contents

Questions and Answers

H
hjohnsonAug 11, 2025
What to do if hot-swapping failed drives on QNAP Storage?
- A
  Andrew LucasAug 11, 2025
  To replace a failed drive, log on to QuTS hero, navigate to Main Menu > Storage & Snapshots > Storage > Disks/VJBOD, and find the failed drive. Ensure you have a new hard drive with equal or greater capacity. Remove the failed drive from the device, wait about 20 seconds (or until you hear two beeps), then remove the failed drive from its tray. Insert the new drive into the tray, and install it in the device.
M
Molly BowmanAug 25, 2025
What to do if Qfinder Pro or myQNAPcloud cannot locate the QNAP Storage during QuTS hero installation?
- S
  Shelly FletcherAug 25, 2025
  If Qfinder Pro or myQNAPcloud fails to locate the NAS during QuTS hero installation, the drives or data may be faulty. Power off the NAS, remove all drives, power it back on, and try locating it again using Qfinder Pro or myQNAPcloud. If found, reinsert the drives and continue with the QuTS hero installation.

QNAP TS-h1290FX-7232P-64G Specifications

General

Model	TS-h1290FX-7232P-64G
Category	Network Storage Server
Maximum Memory	1 TB (8 x 128 GB)
Memory Slot	8
2.5 Gigabit Ethernet Port (RJ45)	2
100GbE SFP28	2
USB 3.2 Gen 1 port	2
USB 3.2 Gen 2 (10Gbps) Port	2
HDMI Output	1
Expansion Slots	2
Form Factor	Tower
CPU	AMD EPYC 7000 Series
CPU Architecture	64-bit
RAM	64 GB
Flash Memory	5GB (DOM)
Drive Bays	12 x 3.5-inch SATA 6Gb/s drive bays
Drive Compatibility	3.5" SATA HDD/SSD, 2.5" SATA HDD/SSD
PCIe Slot	4
Operating System	QTS hero

Related product manuals

Preview: QNAP TS-h1290FX

QNAP TS-h1290FX

Preview: QNAP TS-230

Preview: QNAP TS-251+

Preview: QNAP TS-332X

Preview: QNAP TS-219P+