LED Status Description
Drive activity Flashes red The data is being accessed and a read/write error occurs
during the process.
Red A drive read/write error occurred.
Flashes green Data is being accessed.
Green The drive is ready.
O No drive was detected.
Drive status Green The drive is ready.
Red A drive read/write error occurred.
Flashes red 5 times per
second
The drive is being located in the operating system.
O No drive was detected.
2.5 Gigabit
Ethernet speed
Green The network connection is operating at 2.5 Gbps.
Orange The network connection is operating at 1 Gbps.
O • The network connection is operating at 10 Mbps.
• There is no network connection.
2.5 Gigabit
Ethernet activity
Orange A network connection has been established.
Flashes orange The device is being accessed from the network.
O There is no network connection.
25 Gigabit
Ethernet speed
Green The network connection is operating at 25 Gbps.
Orange The network connection is operating at 10 Gbps or 1 Gbps.
O There is no network connection.
25 Gigabit
Ethernet activity
Orange A network connection has been established.
Flashes orange Data is being transmitted.
O There is no network connection.
Expansion Orange An expansion unit is connected.
O No expansion unit has been detected.
Audio Alert
Duration Frequency Description
Short beep (0.5 seconds) 1 • The NAS is starting up.
• When the reset button is pressed for 3 seconds,
the NAS resets congurations.
• When the reset button is pressed for 10 seconds,
the NAS resets congurations and reboots.
3 • The NAS data cannot be copied to the external
storage device connected to the front USB port.
• The operating system was updated.
TS-h1290FX User Guide
Basic Operations 43
To Next Page
Loading...
