EasyManua.ls Logo

QNAP TS-h1290FX - User Manual

QNAP TS-h1290FX
61 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
TS-h1290FX
User Guide
Document Version: 1
20/01/2022

Table of Contents

Other manuals for QNAP TS-h1290FX

Preview: Quick Installation Guide
Quick Installation Guide12 pages

Questions and Answers

  • M
    Michele WilsonAug 8, 2025
    What to do if hot-swapping failed drives on QNAP Storage?
    • S
      Shane SchaeferAug 8, 2025
      To replace a failed drive, log on to QuTS hero, navigate to Main Menu > Storage & Snapshots > Storage > Disks/VJBOD, and find the failed drive. Ensure you have a new hard drive with equal or greater capacity. Remove the failed drive from the device, wait about 20 seconds (or until you hear two beeps), then remove the failed drive from its tray. Insert the new drive into the tray, and install it in the device.
  • G
    Gerald ThomasAug 25, 2025
    What to do if Qfinder Pro or myQNAPcloud cannot locate the QNAP Storage during QuTS hero installation?
    • V
      Victoria BishopAug 26, 2025
      If Qfinder Pro or myQNAPcloud fails to locate the NAS during QuTS hero installation, the drives or data may be faulty. Power off the NAS, remove all drives, power it back on, and try locating it again using Qfinder Pro or myQNAPcloud. If found, reinsert the drives and continue with the QuTS hero installation.

QNAP TS-h1290FX Specifications

General IconGeneral
BrandQNAP
ModelTS-h1290FX
CategoryNetwork Storage Server
LanguageEnglish

Related product manuals