USB One Touch Copy Button
The USB One Touch Copy button allows you to copy data backups from a USB device to the NAS or from the
NAS to a USB device.
This feature supports incremental backups. The NAS only copies les that were modied or added after the
last backup.
To congure the behavior of the button when an external device is connected to the button's USB port,
install and use Hybrid Backup Sync on your QNAP operating system. For details, see the Hybrid Backup Sync
documentation.
LCD Panel
The LCD panel allows you to perform the following operations:
• Restart and power o the device
• Congure or change the LCD panel password
• View and congure network settings
• View information on the system, physical disks, and shared folders
LCD Panel Buttons
Button Usage
Enter • Display a conguration screen.
• Move to the next item on the conguration screen.
Select • Move to the next item on a menu.
• Modify a value on a conguration screen.
Viewing TCP/IP Settings
You can view the following settings for each network adapter on the NAS.
• IP address
• Subnet mask
• Default gateway
• Primary DNS
• Secondary DNS
1. Press Enter or Select.
The panel displays the NAS name and QuTS hero version.
2. Press and hold Enter for two seconds.
The panel displays Main Menu 1. TCP/IP.
3. Press and hold Enter.
The panel displays the IP address of the rst network adapter.
TS-h1290FX User Guide
Basic Operations 38
To Next Page
Loading...
Need help?
General
